DA4T10304 Stacked Rj45 Connectors 2x4 Integrated Gigabit Ethernet Modular Jack

DA4T10304 Stacked Rj45 Connectors 2x4 Integrated Gigabit Ethernet Modular Jack

10/100/1000 Base-T RJ45 2x4 Integrated Magnetics Connector

1.Complies with requirement of IEEE 802.3ab standards.
2.RJ-45 connector integrated with transformer/impedance resistor/high voltage capacitor.
3.Size same as RJ-45 connector to save PCB board space.
4.Reduced EMI radiation to improve EMI performance.
5.Design for 10/100/1000 BASE transmission over UTP-5 cable.
6.Compliance with ROHS requirements.
Designing Model: 【DA4T10304】

Mass Production Model:【LPJG47561CNL】

MAG.REVERSE LATCH ,

LED optional ; EMI-finger Optional.

Description
1. Product Type Features:

1) Product Type = Connector
2) Jack Type = RJ45
3) Profile = Standard
4) PCB Mounting Orientation = Side Entry (Right Angle)/Top Entry(Vertical)

2. Mechanical Attachment:
1) Jack Configuration = 2x4

3. Electrical Characteristics:
1) Shielded = Yes

4. Termination Related Features:
1) EMI Finger - Bottom = Without
2) Termination Method = Solder

5. Body Related Features:
1) Port Configuration = Single/Multi
2) EMI Fingers -Top and Sides = With/ Without
3) Latch Orientation = Standard - Latch Down
4) PCB Tail Length

6. Contact Related Features:
1) Preloaded = Yes
2) Contact Termination Type = Through Hole/Surface Mount

7. Housing Related Features:
1) Connector Style = Jack

8. Industry Standards:
1) RoHS/ELV Compliance = RoHS compliant, ELV compliant
2) Lead Free Solder Processes = Wave solder capable to 240°C,

Wave solder capable to 260°C, Wave solder capable to 265°C

Reflow-Soldering Optional;
3) RoHS/ELV Compliance History = Always was RoHS compliant

9. Identification Marking:
1) Left LED Color (Position #1) = Green - 250 ohm resistor
2) Right LED Color (Position #2) = Green - 250 ohm resistor

10. Conditions for Usage:
1) Applies To = Printed Circuit Board
2) Environmental Conditions = Office / Premises
3) Operating Temperature (°C ) = 0 - 70/-40 - +85

11.Hipot:

1500Vrms MIN

Electrical Specifications @25℃
1.Turns Ratio:
PRI:SEC = 1CT:1CT

2.OCL:
350uH MIN @ 100KHz,100mV,8mADC
3.Insertion Loss:
1～100MHz:-1.0dB MAX
4.Return Loss(dB MIN):
1～30MHz:-18 30～60MHz:-14
60～80MHz:-12
5.Crosstalk(dB TYP):
1～30MHz:-40 30～60MHz:-35
60～80MHz:-30
6.Differential to Common Mode Rejection:
1～50MHz: -30dB TYP
50～150MHz: -20dB TYP
7.CMRR: 1～100MHz:-30dB MIN
8.Isolation: 1500Vrms MIN
9.Operating Temperature Range: -40℃～+85℃.

NOTES

1.Designed to support application,such as SOHO(ADSL
modems),LAN-on-Motherboard(LOM),hub and Switches.
2.Meets IEEE 802.3 specification
3.Connector Materials:
Housing:Thermoplastic UL94V-0
Contact/Shield: Copper alloy
Shield plating: Nickel
Contact plating: Gold 6 micro-inches min.In contact area.
4.Wave solder tip temperature: 265℃ Max,5 Sec Max.

Competitive Advantage

DA4T10304

18 years production experience,

2600 staff,

100% test

Flexible delivery time

Main Customer

Design for Ti , Intel , Samsung , Fluke , Jabil , Flextronics ,Cypress, Freescale,EKF.......

EMS Application

Built-in Flexible PCB Assembly; Rigid-Flexible PCB Assembly; Microelectronic, Flip Chip; Microelectronic, Chip On Board; Optoelectronic Assembly; RF / Wireless Assembly; Through Hole Assembly; Surface Mount Assembly; System Assembly; Printed Circuit Board Assembly

Other Replaceable List

stacked rj45 connectors

rj45 usb connector combo

DA4T10304 Stacked Rj45 Connectors 2x4 Integrated Gigabit Ethernet Modular Jack Images